Uberti Dragoon Revolver Conversion Cylinder .45LC
This blued conversion cylinder converts steel frame Uberti 1st,2nd,3rd and Whitneyville Dragoon revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition.
This blued conversion cylinder converts steel frame Uberti 1st,2nd,3rd and Whitneyville Dragoon revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition. Reloading/loading is done by removing the barrel, cylinder, and then removing the cylinder cap. The cylinder contains 6 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. If you order the conversion cylinder and gun on the same order Taylor's will fit your conversion cylinder to your gun at no charge before it ships out as a complimentary service. Cylinders must ship separate from the black powder revolver if purchased at the same time and this may result in additional shipping charges.
|FFL Dealer Required
|New Arrival Product
|Additional Ammo Calibers Gun Will Work With
|Gun Make & Model
|Uberti dragoon .44 revolver
|Quantity in Pack
|Recommended Ammo Specs
|Lead ammo that does not exceed 850 fps velocity
|Windows cut above chambers to see loaded/empty chambers with the cap on