Ruger Old Army Revolver Fluted Conversion Cylinder .45LC
This blued fluted conversion cylinder converts Ruger Old Army revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition.
Only 3 left
This blued fluted conversion cylinder converts Ruger Old Army revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition. Reloading/loading is done by removing the cylinder and then removing the cylinder cap from the cylinder. The cylinder contains 6 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. The finish option of fluting is available to have flutes cut into the body of the conversion cylinder or to have a smooth cylinder with no fluting. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. Cylinders ship separate from firearms purchases.
|FFL Dealer Required||No|
|New Arrival Product||No|
|Additional Ammo Calibers Gun Will Work With||.45Schofield|
|Cylinder Finish||Blued half fluted|
|Gun Make & Model||Ruger old army .44 revolver|
|Quantity in Pack||1|
|Recommended Ammo Specs||Lead ammo that does not exceed 850 fps velocity|
|Safety Type||Windows cut above chambers to see loaded/empty chambers with the cap on|
Taylor's & Co Cartridge Conversion Cylinders