Pietta 1863 Pocket Remington Revolver Conversion Cylinder .32S&W
This blued conversion cylinder converts steel frame Pietta 1863 pocket remington revolvers from .31 black powder to .32S&W smokeless ammunition.
Out of stock
This blued conversion cylinder converts steel frame Pietta 1863 pocket remington revolvers from .31 black powder to .32S&W smokeless ammunition. This cylinder will not work with ammo labeled as.32S&W Long. Reloading/loading is done by removing the cylinder from the gun and then removing the cylinder cap. The cylinder contains 5 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. This cylinder has an additional notch cut on it for a safety notch when carrying cylinder loaded with all 5 rounds. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. If you order the conversion cylinder and gun on the same order Taylor's will fit your conversion cylinder to your gun at no charge before it ships out as a complimentary service. Cylinders must ship separate from the black powder revolver if purchased at the same time and this may result in additional shipping charges.
|FFL Dealer Required
|New Arrival Product
|Gun Make & Model
|Pietta 1863 pocket remington .31 revolver
|Quantity in Pack
|Recommended Ammo Specs
|Lead ammo that does not exceed 750 fps velocity
|Additional cylinder notch cut
Pietta Remington Pocket Pistol