Pietta 1858 Remington Revolver Fluted Conversion Cylinder .45LC
This blued fluted conversion cylinder converts steel frame Pietta 1858 remington revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition.
Only 10 left
This blued fluted conversion cylinder converts steel frame Pietta 1858 remington revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition. Reloading/loading is done by removing the cylinder and then removing the cylinder cap from the cylinder. The cylinder contains 6 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. The finish option of fluting is available to have flutes cut into the body of the conversion cylinder or to have a smooth cylinder with no fluting. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. If you order the conversion cylinder and gun on the same order Taylor's will fit your conversion cylinder to your gun at no charge before it ships out as a complimentary service. Cylinders must ship separate from the black powder revolver if purchased at the same time and this may result in additional shipping charges.
|FFL Dealer Required||No|
|New Arrival Product||No|
|Additional Ammo Calibers Gun Will Work With||.45Schofield|
|Cylinder Finish||Blued half fluted|
|Gun Make & Model||Pietta 1858 remington .44 revolver|
|Quantity in Pack||1|
|Recommended Ammo Specs||Lead ammo that does not exceed 850 fps velocity|
|Safety Type||Windows cut above chambers to see loaded/empty chambers with the cap on|
Taylor's & Co Cartridge Conversion Cylinders
Installing and shooting Remington Cartridge Conversion Cylinders
1858 Remington Cartridge Conversion