Get A Free Blued Spare Cylinder With Purchase of In Stock Pietta 1851, 1860, 1861, & 1858 Models!

SKU
CNV/1131

Pietta 1851 Navy & 1860 Army Revolver Conversion Cylinder .45LC

This blued conversion cylinder converts steel frame Pietta 1851 & 1860 Navy & Army revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition.
$225.00
Out of stock
-
+

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

This blued conversion cylinder converts steel frame Pietta 1851 & 1860 Navy & Army revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition. Due to the shorter frame length of these revolvers, some .45LC ammunition could be too long for the conversion cylinder if the factory does not follow standard OAL measurements. Reloading/loading is done by removing the barrel, cylinder, and then removing the cylinder cap from the cylinder. The cylinder contains 5 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. This conversion has safety notches cut between each chamber to use when carrying cylinder with all 5 chambers loaded. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. If you order the conversion cylinder and gun on the same order Taylor's will fit your first conversion cylinder to your gun at no charge before it ships out as a complimentary service. Cylinders must ship separate from the black powder revolver if purchased at the same time and this may result in additional shipping charges.
More Information
SKU CNV/1131
MSRP 225
New Arrival Product No
UPC 83966500929
Additional Ammo Calibers Gun Will Work With .45Schofield
Caliber .45LC
Capacity 5
Cylinder Finish Blued rebated
Gun Make & Model Pietta 1860 army .44 revolver, Pietta 1851 navy .44 revolver
Quantity in Pack 1
Recommended Ammo Specs Lead ammo that does not exceed 850 fps velocity, Standard length .45LC ammo as longer ammo will not fit
Safety Type Additional cylinder notches cut between chambers

Downloadable Documents

Taylor's & Co Cartridge Conversion Cylinder for the 1860 Army Revolver