Sight Accessories

Taylor's & Company also offers an array of sight accessories to support our fine selection of Creedmore and Tang sights.

8 Item(s)

per page

  • Six Interchangeable Glass Bubbles (Spirit Levels), Model USA401

    These glass bubbles are used to measure canting of the rifle from side to side. Included are (2) red, (2), green, and (2) blue bubbles for different light conditions. Bubbles fit front tunnel sights USA426, USA457, USA462, USA467 and spirit level USA402 made by Pedersoli. Learn More
    $46.00

  • Bubble (Spirit Level) Insert, Model USA402

    This insert is designed to replace the rear barrel sight when a tang sight is used, to prevent canting the rifle and to promote long-range accuracy. Dovetail base measurements are: A = 3/8” (9.5 mm) - x = 30° (fitting may be required for guns manufactured by other companies than Pedersoli). Insert includes one yellow bubble level. Manufactured by Pedersoli. Learn More
    $48.00

  • Front Globe Sight With Windage & Bubble Level, Model USA457

    This finely machined globe sight features a micrometric screw for windage adjustment. Equipped with yellow spirit level and fifteen interchangeable inserts. Dovetail Base Measurements are: A = 3/8” (9.5 mm) – x = 30° – H = .689” (17.5 mm) (fitting may be required for guns manufactured by companies other than Pedersoli). Blue finish. Sight features two screw end caps to retain glass bubble level in sight. Manufactured by Pedersoli. Learn More
    $206.00

  • Professional Hadley Style Eyepiece, Model USA463

    This one, steel eyepiece works with several Creedmore sights: USA404, USA405, USA406, USA430, USA431, USA446, USA461, and USA465. It features eight viewing holes of different diameters on a rotating disc. Different viewing hole sizes can be selected, to correspond with available light, without removing the eye piece. Viewing hole diameters are 0.012” (0.3 mm); 0.020” (0.5 mm); 0.031” (0.8 mm); 0.039” (1 mm); 0.051” (1.3 mm); 0.063” (1.6 mm); 0.078” (2 mm); and 0.086” (2.2 mm). The eyepiece features a rubber ring to prevent discomfort to the shooter from recoil. This eyepiece is only made to fit Pedersoli sights. Learn More
    $118.00

  • Sight Aperture Inserts, Model 5504

    Ten sight aperture inserts for use in Taylor's sights 5505, S10, and D01S10. Inserts come on a tin disk that you can break them off of to use. Learn More
    $12.00

  • Front Globe Sight, Model 5505

    3 Review(s)
    A front globe sight is necessary to be accurate with any tang sight. Features 3/8” dovetail base (manufactured with a high base so some fitting may be required for the dovetail cut). Blue finish. This sight has a top spring retention that can be moved back and forth to change out the insert. Sight comes with one traditional post insert. Accepts sight inserts, model 5504. Manufactured by Uberti. Learn More
    $37.00

  • Front Globe Sight With Windage Adjustment & Inserts, Model 5509

    This front globe sight takes accuracy to the next level with the adjustable windage feature on the base. Features a 3/8” dovetail base (fitting may be required for guns manufactured by companies other than Uberti). Includes five interchangeable inserts and a retainer clip. Blue finish. Manufactured by Uberti. Learn More
    $197.00

  • Front Globe Sight With Inserts, Model S10

    A front globe sight is necessary to be accurate with any tang sight. This sight comes with 10 interchangeable inserts. Features 3/8” dovetail base (fitting may be required for guns manufactured by other companies than Uberti). Blue finish. Sight package includes a small retainer screw for extra tension on the dovetail block when installed and an adjustable ring to loosen/tighten to replace the insert. Extra inserts are available, Item 5504. Manufactured by Uberti. Learn More
    $64.00

8 Item(s)

per page