Uberti 1860 Army Revolver Engraved Conversion Cylinder .45LC
This blued engraved conversion cylinder converts steel frame Uberti 1860 Army revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition.
Out of stock
This blued engraved conversion cylinder converts steel frame Uberti 1860 Army revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition. Due to the shorter frame length of these revolvers, some .45LC ammunition could be too long for the conversion cylinder if the manufacturer does not follow standard OAL measurements. Reloading/loading is done by removing the barrel, cylinder, and then removing the cylinder cap from the cylinder. The cylinder contains 5 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. This conversion has safety notches cut between each chamber to use when carrying cylinder with all 5 chambers loaded. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. If you order the conversion cylinder and gun on the same order Taylor's will fit your conversion cylinder to your gun at no charge before it ships out as a complimentary service. Cylinders must ship separate from the black powder revolver if purchased at the same time and this may result in additional shipping charges.
|FFL Dealer Required||No|
|New Arrival Product||No|
|Additional Ammo Calibers Gun Will Work With||.45Schofield|
|Cylinder Finish||Blued rebated engraved|
|Gun Make & Model||Uberti 1860 army .44 revolver|
|Quantity in Pack||1|
|Recommended Ammo Specs||Lead ammo that does not exceed 850 fps velocity, Standard length .45LC ammo as longer ammo will not fit|
|Safety Type||Additional cylinder notches cut between chambers|
Taylor's & Co Cartridge Conversion Cylinder for the 1860 Army Revolver