BOND Arms - Christmas in July.  Get a gift card with the purchase of any in stock BOND Derringer.

SKU
RB1/200054

Lemat Cavalry 6.75" .44

The Le Mat shot barrel is fired by cocking the hammer and flipping down the hammer nose to strike the lower nipple for the barrel. Unlike other wedge retained black powder revolvers, the Le Mat is easily taken apart by using the take down lever and unscrewing the whole barrel assembly. The Cavalry model features include a case hardened hammer and trigger, blued steel parts, checkered walnut two-piece grip, lanyard ring, and spurred triggerguard.
$1,448.25
Out of stock
-
+

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

The Le Mat revolver is considered the most awesome hand-held firing weapon ever produced. This nine-shot revolver with a 20GA single-shot barrel was a favorite among Confederate cavalry officers. The Le Mat shot barrel is fired by cocking the hammer and flipping down the hammer nose to strike the lower nipple for the barrel. Unlike other wedge retained black powder revolvers, the Le Mat is easily taken apart by using the take down lever and unscrewing the whole barrel assembly. The Cavalry model features include a case hardened hammer and trigger, blued steel parts, checkered walnut two-piece grip, lanyard ring, and spurred triggerguard. This infamous revolver is must-have addition to any black powder collection! A conversion cylinder is not available for this model.
More Information
SKU RB1/200054
MSRP 1448.25
Weight (LB) 3.52
FFL Dealer Required No
Manufacturer Pietta
New Arrival Product No
UPC 83966500458
Action Type Single action
Backstrap Finish Blued steel
Barrel Bore Diameter 0.446"
Barrel Contour Octagonal
Barrel Finish Blued steel
Barrel Grooves 7
Barrel Length (in) 6.75"
Barrel Twist & Rotation LH 1x30"
Caliber .44 & 20G
Capacity 9 & 1 20G shot
Cylinder Bore Min/Max 0.445"/0.447"
Cylinder Finish Blued steel roll engraved
Firing Sequence Hammer selector
Frame Finish Blued steel
Front Sight Dovetail blade
Grip Finish Walnut checkered
Ignition Type Percussion
Overall Length (in) 13.4"
Percussion Cap Type #10 or #11
Rear Sight Rear Sight Notch On Hammer
Recommended Bullet/Shot 0.454" round ball and 0.27" round ball
Recommended Conversion Cylinder Model No conversions available
Recommended Powder Load 12-35 grains of FFFG and 25-35 grains of FFFG blackpowder
Taylor Tuning Option Taylor tuning not available
Trigger Type & Pull Single trigger
Triggerguard Finish Blued steel spurred