Accessories

Accessories

Set Descending Direction

Items 1 to 20 of 145 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Conversion Cylinder Ferrule Removal Tool

This is a tool to remove the ferrules from your conversion cylinder cap. The ferrule is a small ring that screws down over the firing pin to hold it in the cap. The ferrules in Taylor's conversion should always be hand-tight and not over tightened as this could result in difficult to remove ferrules.

Flintlock Powder Measure 0-150 Grain

This flintlock style brass powder measure can be used for 0-150 grain loads. It includes an overturning long funnel and pick. To use this measure: loosen the side screw, pull out the measure stick to the desired amount, tighten the side screw to lock the measurement into place, pour powder into the main tube so that it is level with the top, then tip the tube over to pour the powder into the attached funnel.

Bone Orchard .38SP Ammunition

This high-quality .38 SP Cowboy Ammunition is produced using 125 grain TC flat-point lead bullets. Velocity is 700 FPS. Contains 50 rounds per box. Manufactured by Velocity Munitions. You must be 21 years or older to order ammunition and check your local laws before ordering. Ammunition must ship UPS ground and separate from firearms. Due to safety considerations and legal/regulatory reasons, ammunition may not be returned. By ordering this ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this ammunition.

Black Hills .38LC Ammunition

$32.58
Blacks Hills manufactured ammo. Features a .158 grain RNL bullet and 650 FPS velocity. Box of 50 rounds. You must be 21 years or older to order ammunition and check your local laws before ordering. Ammunition must ship UPS ground and separate from firearms. Due to safety considerations and legal/regulatory reasons, ammunition may not be returned. By ordering this ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this ammunition.

Black Hills .45LC Ammunition

Blacks Hills manufactured ammo. Features a 250 grain RNFP bullet and 725 FPS velocity. Box of 50 rounds. You must be 21 years or older to order ammunition and check your local laws before ordering. Ammunition must ship UPS ground and separate from firearms. Due to safety considerations and legal/regulatory reasons, ammunition may not be returned. By ordering this ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this ammunition.

Black Hills .44-40 Ammunition

$40.90
Blacks Hills manufactured ammo. Features a .200 grain RNFP bullet and 800 FPS velocity. Box of 50 rounds. You must be 21 years or older to order ammunition and check your local laws before ordering. Ammunition must ship UPS ground and separate from firearms. Due to safety considerations and legal/regulatory reasons, ammunition may not be returned. By ordering this ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this ammunition.

Black Hills .38-55 Ammunition

$33.86
Blacks Hills manufactured ammo. Features a .255 grain FNL bullet and 1250 FPS velocity. Box of 20 rounds. You must be 21 years or older to order ammunition and check your local laws before ordering. Ammunition must ship UPS ground and separate from firearms. Due to safety considerations and legal/regulatory reasons, ammunition may not be returned. By ordering this ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this ammunition.

Black Hills .38SP Ammunition

Blacks Hills manufactured ammo. Features a .158 grain CNL bullet and 800 FPS velocity. Box of 50 rounds. You must be 21 years or older to order ammunition and check your local laws before ordering. Ammunition must ship UPS ground and separate from firearms. Due to safety considerations and legal/regulatory reasons, ammunition may not be returned. By ordering this ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this ammunition.

Black Hills .357MAG Ammunition

$31.30
Blacks Hills manufactured ammo. Features a .158 grain CNL bullet and 800 FPS velocity. Box of 50 rounds. You must be 21 years or older to order ammunition and check your local laws before ordering. Ammunition must ship UPS ground and separate from firearms. Due to safety considerations and legal/regulatory reasons, ammunition may not be returned. By ordering this ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this ammunition.

Long Creedmore Tang Sight 1-1/2" Blued Clearance

This is a creedmore style tang sight with 1-1/2" hole spacing. Elevation and windage adjustment. Windage adjustment works by loosening knobs on bottom and moving sight ladder to left or right. Blued finish.

Revolver Sure Hit Brass Sight

This brass sight will easily fit right over your existing single action revolver factory front sight whether your gun is a Colt, Uberti, or Ruger Vaquero (new or old model). They provide a wider and more obvious sight making target acquisition extremely fast! Each sight comes with full instructions and everything you need for installation. This sight is SASS competition approved.

Ghost Tang Sight

$79.00
The Ghost tang sight design is inspired by several sight models used in the 1800s and is useful for active shooting scenarios like hunting. The sight is adjustable in elevation (threaded eye piece) and windage (dovetailed eye piece base block). The sight comes with two eye pieces: smaller ring is used for target shooting and the larger ring is used for low-light conditions. Mounting distance between screw holes center-to-center is 1-3/4". This sight is commonly used with the following Pedersoli models: Traditional Hawken, Kodiak Express, Side by Side blackpowder shotgun (requires front sight height of 17mm), and the blackpowder Howdah pistol (requires front sight height of 14mm).

Goodwin Style 2nd Generation Creedmore Sight

$302.00
This Goodwin Style creedmore features premium accuracy and stability due to its unique base. The sight is CNC machined to ensure exact part components. The eyepiece is adjustable for windage by 1" and the elevation staff allows for about 3" of adjustment. The mounting measurement between screw holes center-to-center is 1-7/16 to 2-5/16". Only screws for Pedersoli manufactured guns are included with sight. Fits Rolling Block, Sharps, 1885, and Chiappa 1886 models. Manufactured by Pedersoli.

Long Creedmore Tang Sight 1-1/2" Case-Colored Clearance

This is a creedmore style tang sight with 1-1/2" hole spacing. Elevation and windage adjustment. Windage adjustment works by loosening knobs on bottom and moving sight ladder to left or right. Case Colored finish.

Short Creedmore Tang Sight 1-1/2"Blued Clearance

$100.00
This is a creedmore style tang sight with 1-1/2" hole spacing. Elevation adjustment only on this sight. Blued finish.

Soule-Type, Long-Range Creedmore Professional Set Manufactured by Pedersoli, Model USA175

$738.00
A wooden case, including the following items: USA406 Soule-Type, Long-Range Creedmore Sight; USA426 Spirit Level Tunnel Sight and 12 Inserts; USA463 Professional Hadley-Style Eyepiece; and USA401 Six Interchangeable Glass Bubbles.

Wm. Malcolm 3/4” Telescopic Rifle Scope 17”, 3X Power, Model 900101

The 17″ Malcolm scopes are ideal for many of the single-shot and lever-action cartridge rifles produced during the late 1880s and 1890s. Additional bases may be needed to mount the scope depending on what gun you have. Please refer to the mount guide on the main scope page or call Taylor's at 540-722-2017.

Rifle Sure Hit- Large Brass Sight

This brass rifle sight slips snugly over your Marble Arms style front site that is mounted on an 1866, 1873, or Marlin lever action rifle. This large sized brass sight is measured at 3/16 and is SASS competition approved. Each sight comes with full instructions and everything you need for installation.

Rifle Sure Hit- Medium Brass Sight

This brass rifle sight slips snugly over your Marble Arms style front site that is mounted on an 1866, 1873, or Marlin lever action rifle. This medium sized brass sight is measured at 5/32 and is SASS competition approved. Each sight comes with full instructions and everything you need for installation.

Revolver Sure Hit Brass Sight Set Of Two

This brass sight will easily fit right over your existing single action revolver factory front sight whether your gun is a Colt, Uberti, or Ruger Vaquero (new or old model). They provide a wider and more obvious sight making target acquisition extremely fast! Each sight comes with full instructions and everything you need for installation. This sight is SASS competition approved. Contains two sights for your pair of guns.